LIFX one-light hardware budget: a real physical button, local hub and complete lamp

Discuss Lifx Smart Lighting Bulbs and Devices
Post Reply
User avatar
ZerOne
Site Admin
Posts: 262
Joined: Sun Dec 13, 2020 8:21 am

This accompanies the LIFX local-control introduction with a practical answer to “how do I turn it on without opening my phone?” A smart bulb plus its app does not, by itself, supply a wireless wall switch.

The exact light, not an incompatible bargain
Choose LIFX White A60 E27 L3A19LW08E27IN, the Australian retailer's E27 variant. LIFX specifies 100–240V, 8.5W, up to 800 lumens, 2700K warm white and software dimming. It is not the colour/tunable-white model, and I am not assuming Matter support on this particular product.

For physical control use a Flic button with Hub Mini and Flic's documented LIFX integration. The button speaks BLE to the hub; the hub communicates over local Wi-Fi/LAN to the powered LIFX bulb. The bulb itself is not Bluetooth Mesh or Zigbee. This is an ordinary BLE accessory bridge plus Wi-Fi lighting, not a universal rule that any Bluetooth button can operate any Wi-Fi bulb.

All purchased parts for this example Priced equipment subtotal: AUD186.37 (about USD128.60).

The Flic kit includes its button/battery, Hub Mini and USB-C power cable, but does not list a wall power supply. The manual requires an external USB supply rated at least 1A. The separately priced Belkin Australian adapter supplies 5V, 2.4A. “12W” is its power rating, not a 12V output.

I have also counted a known USB-A-to-USB-C cable so the selected USB-A supply and Mini's USB-C input have a confirmed connector match; the kit listing only identifies its included lead as USB-C. If the included lead proves to have the required USB-A end, this separately counted lead is redundant and you can deduct AUD14.00 (about USD9.66). The Good Guys cable offer is in-store-only clearance and requires a local stock check; it is not a promise of online delivery. This explicit lead allowance is a real priced product, not an invented contingency.

What is compulsory and what is optional?
The Mini is included here so everyday button operation does not depend on leaving your phone at home as a Bluetooth bridge. Flic also supports phone-based operation; that is a different reliability/use assumption, not the chosen physical-switch installation. No Home Assistant computer, Hue Bridge or paid automation service is required for Flic's documented native LIFX path.

Reuse an existing 2.4GHz Wi-Fi router, compatible phone and internet for initial setup/updates: AUD0 / USD0 additional spend in this household example. Configure the bulb in LIFX, the Mini in Flic, then add Flic's LIFX integration and assign explicit push/double-push/hold actions using supported functions, such as on/off and a dimmed level. Select local LIFX control rather than assuming an IFTTT/cloud routine is the only route. The hub and network must stay powered; commissioning may require vendor apps/accounts/internet even when the chosen subsequent actions are local. No custom programming or commissioning licence is budgeted.

Literal wiring and radio setup
The lamp uses its factory Australian 230V flex and E27 holder. The button is battery BLE; the Mini uses a USB-A-to-USB-C power lead and 2.4GHz Wi-Fi to the router, not Ethernet. There is no control cable to pull to the button. Keep the hub and lamp on a local network where their supported discovery/control traffic can reach each other; client isolation or an overly restrictive IoT VLAN can break it. Do not expose lamp/hub ports directly to the internet.

Required practical items and safety
Reuse an existing Australian 230V socket and a stable table/edge suitable for TERTIAL's supplied clamp. TERTIAL is a complete lamp, not just a loose E27 holder, and is rated for a maximum 13W light source. The selected bulb fits that limit. Turn power off when fitting a bulb; keep the lamp's ordinary inline switch on during normal remote operation. Do not put these smart bulbs behind an ordinary phase-cut wall dimmer. Plug-in assembly does not require mains rewiring; any new fixed socket or alteration does require a licensed electrician. Keep coin/button batteries away from children.

Complexity and another light
This is moderate app/network setup rather than electrical programming: two apps, hub Wi-Fi, an integration and action assignment. Test the actual physical button after configuration, with the phone away, rather than treating an app screenshot as proof of the complete path. It is not a measured latency or offline-availability guarantee.

CleverHouse's exact E27 public catalogue variant was purchasable at the quoted price; its enabled product form/catalogue were checked rather than relying on a generic “coming soon” theme label. Flic's exact kit catalogue also marked it available. The LIFX bulb alone is AUD29.99 (about USD20.69); another bulb plus this complete lamp is AUD53.38 (about USD36.83). The hub, supply and controller can be reused subject to supported configuration/range; independently placed physical buttons would be extra purchases. IKEA lamp and clearance-cable stock remain location-dependent.

Price basis
Prices checked 8 November 2026 (Australia/Sydney). These are Australian listings, not US kits. USD figures are converted equivalents using RBA 6 November 2026: AUD1 = USD0.6900, rounded to cents; converted totals use the unrounded AUD sum. GST is confirmed only where stated above; the other extracted listings did not establish tax inclusion. Stock and offers can change. Subtotals exclude shipping, cables/building wiring, duties if importing, labour and the separately identified site items. No purchases or hardware testing are claimed.

Manufacturer / implementation references
Top
Post Reply

Return to “Lifx Lighting Discussion”