Step 11:
Change / Increment the first 2 pairs of digits in the Data field
These digits represent the card number that this Desfire card will send to the Desfire reader, when swiped.
NOTE: The values entered here should be unique for each and every card programmed in to the system.
China Desfire Card / Reader Programming
Step 12:
Click on the [Write Data] button.
This will write the new Card Number to the Desfire Card.
Once completed, the card can now be tested by swiping at the corresponding Desfire reader.
The reader should beep (acknowledging that the card was swiped), and the card number will be sent to the connected panel.
Click on the [Write Data] button.
This will write the new Card Number to the Desfire Card.
Once completed, the card can now be tested by swiping at the corresponding Desfire reader.
The reader should beep (acknowledging that the card was swiped), and the card number will be sent to the connected panel.
Step 13:
Programming another card
Change / Increment the first 2 pairs of digits in the Data field, so as the 2 numbers differ to the previous card.
Once Completed, Carry out Steps 7 through to 12.
Step 7 → [Activate Card] - Configure card for programming
Step 8 → [Format Card] – Delete any existing data on the card
Step 9 → [Create App] – Create the required directories on the card
Step 10 → [Modified Key] – Change the key on the card to match the Desfire reader
Step 11 → Update the first 2 Card data digits for the Card Number
Step 12 → [Write Data] - Write the new card number to the Desfire card
Programming another card
Change / Increment the first 2 pairs of digits in the Data field, so as the 2 numbers differ to the previous card.
Once Completed, Carry out Steps 7 through to 12.
Step 7 → [Activate Card] - Configure card for programming
Step 8 → [Format Card] – Delete any existing data on the card
Step 9 → [Create App] – Create the required directories on the card
Step 10 → [Modified Key] – Change the key on the card to match the Desfire reader
Step 11 → Update the first 2 Card data digits for the Card Number
Step 12 → [Write Data] - Write the new card number to the Desfire card