Getting started with solar, batteries and energy monitoring in an Australian smart home (2026)

Solar inverters, home batteries, energy monitoring and integrating them with home automation.
Post Reply
User avatar
ZerOne
Site Admin
Posts: 280
Joined: Sun Dec 13, 2020 8:21 am

What this thread is for
A short, practical starting point for watching a rooftop solar system, a home battery and household electricity use from a local smart-home platform such as Home Assistant. It is not a design or sales quote, and it is not a substitute for an accredited installer or a licensed electrician.

Complexity
Planning and monitoring: moderate. Installing or altering solar, battery, metering or switchboard equipment: professional work.

1. Get the physical system right first
Australian Government solar guidance is clear: whether you buy from a retailer or an installer, the system must be installed by an accredited installer. Solar Accreditation Australia (SAA) is the installer accreditation scheme operator. The scheme fully transitioned from the Clean Energy Council to SAA on 29 May 2024. Before you seek a quote, ask for the installer's SAA accreditation number and check that it is current. Official background is on energy.gov.au and the Clean Energy Regulator's installer page.

Mains, inverter, battery and metering work remains electrical work. Licensing is administered by each state and territory; see the Electrical Regulatory Authorities Council licensing contacts. Do not add unofficial current-transformer clamps, meter tails or inverter wiring yourself.

2. Decide what you actually want to measure
The Home Assistant Energy dashboard groups electricity into what you consume, what you produce and what you store. You can start with one source and add more later. Typical Australian questions are:
  • How much did the array produce today?
  • How much was imported from and exported to the grid?
  • If you have a battery, how much was charged and discharged?
  • Which large loads are worth shifting?
The dashboard wants cumulative energy in kWh, not just instantaneous watts. Official docs: energy sensors need device_class: energy and state_class: total or total_increasing. If a device only reports watts, Home Assistant's Riemann sum integral can turn power into energy, but a proper kWh register from a meter or inverter is cleaner.

3. How inverters usually talk
Many modern inverters can be read locally over your LAN. Prefer a local path so production data does not vanish when the vendor cloud or your internet service does.
  • Fronius — official integration. It uses the local Solar API and, when enabled, also reads SunSpec over Modbus TCP. On Gen24, Tauro and Verto, Modbus TCP is turned on under Communication, then Modbus. Writing setpoints (export or battery limits) is a separate, explicit inverter setting and should not be enabled casually.
  • GoodWe — official integration. It polls the inverter on the local network. Official docs cover ET, EH, BT, BH, ES, EM, DT, MS, D-NS, XS and BP families, and they tell you to enable the Modbus TCP option on the communication dongle if you cannot connect. ET/EH families expose the most useful Energy dashboard sensors (import, export, PV generation, battery charge and discharge).
  • SolarEdge Modbus and KACO Modbus — official integrations that read the inverter locally using Modbus TCP. The KACO docs describe this as SunSpec over Modbus TCP on port 502 unless changed, with unit ID 1 in a typical direct connection.
  • Other brands, including many Sungrow systems common in Australia, often speak Modbus or a vendor protocol. Use a core integration if one exists for your exact model. If none does, Home Assistant's generic Modbus integration can read documented registers, or a carefully chosen community integration. Do not guess register maps.
Fronius' own Modbus TCP page explains SunSpec as a manufacturer-independent model for monitoring distributed energy resources over Modbus TCP or RTU.

Security: Home Assistant's Modbus documentation warns that Modbus TCP does not authenticate clients and does not encrypt traffic. Anything that can reach port 502 can often read, and sometimes write, the inverter. Keep inverters on a trusted network segment. A related VLAN design guide is planned for the network-discovery forum.

4. Meters, tariffs and batteries
An inverter's idea of "grid" is only as good as the meter it is paired with. If import/export figures look wrong, the installer probably needs to check the site meter or CT orientation — that is not a Home Assistant bug.

Feed-in and time-of-use tariffs are retailer- and region-specific. Do not hard-code a national rate. Home Assistant can track cost once you enter your actual import and export rates.

Hardware prices for inverters, batteries, CT meters and switchboard work vary by site and should be taken as a written installer quote in AUD. Converted USD figures are not a substitute for that quote.

5. A sensible first path
  • Confirm the inverter model, firmware, local IP (DHCP reservation) and whether Modbus TCP or the vendor local API is enabled.
  • Add the official integration, then identify the cumulative kWh sensors.
  • Under Settings, Dashboards, Energy, add solar production, grid import, grid export and, if present, battery charge and discharge.
  • Wait through a sunny day and a night before judging accuracy.
A worked example for a SunSpec/Modbus inverter into the Energy dashboard is in the project thread that follows this introduction, in this Solar, Battery & Energy Monitoring forum.

A site electricity meter over Modbus was already walked through in the Eastron SDM230 project in the Modbus forum.

Official reading
energy.gov.au: choose your solar retailer and installer
Solar Accreditation Australia: check accreditation
Home Assistant Energy dashboard
Integrating your solar panels
Fronius integration
GoodWe integration
Home Assistant Modbus

Researched from official documentation on 15 November 2026 (Australia/Sydney). This is a planning and how-to guide, not a claim that the exact hardware combination was assembled and tested on a live site. Please correct anything that has moved on.
Post Reply

Return to “Solar, Battery & Energy Monitoring”