IKEA one-light budget: current KAJPLATS kit, real remote, batteries and complete lamp

Discuss the Ikea TRÅDFRI Smart Lighting Hubs
Post Reply
User avatar
ZerOne
Site Admin
Posts: 292
Joined: Sun Dec 13, 2020 8:21 am

This is a concrete hardware companion to the IKEA generations guide. Although the forum is named TRÅDFRI, a current Australian starter purchase need not be an old TRÅDFRI gateway bundle.

The exact current kit and what is inside
Use KAJPLATS 406.195.42, the E27 colour-and-white-spectrum starter kit. IKEA says its bulb and included BILRESA remote are pre-paired and usable together without adding a hub. The bulb model LED2405G8 is 7.8W, up to 1055 lumens and 2200–6500K plus colour. That is not the specification of every KAJPLATS bulb or every legacy TRÅDFRI lamp.

The price of a remote-only product would omit the light; a bulb-only price would omit the switch. This budget also includes the actual E27 lamp, a complete battery pack and a charger, rather than silently assuming those are already owned.
Priced equipment subtotal: AUD66.57 (about USD45.93).

The included remote uses two AAA cells. The listed four-pack of LADDA HR03 1.2V 750mAh NiMH batteries supplies those and two spares; its full pack price is counted. STENKOL charges AAA as well as AA and plugs into an Australian wall socket. Do not accidentally substitute an attractive STENKOL bundle containing only AA batteries. If you already have the correct batteries/charger, you can remove those actual purchases from your personal budget; they are not required twice.

Minimum physical operation versus phone features
For the pre-paired kit, the working path is included physical remote → bulb, with the bulb powered in TERTIAL. No Home Assistant computer, subscription, extra relay or separately bought remote is required. Fit and power the bulb safely, fit the batteries as instructed and check the included remote's documented on/off, dimming and available colour/white operations. Do not reset a working pre-paired kit merely because a generic internet tutorial starts with a factory reset.

IKEA explicitly identifies this product as Matter over Thread. For phone/app control it says a Thread border router is required, for example DIRIGERA, together with a compatible Matter control ecosystem. Those app/controller/network additions are optional for the supplied kit's direct physical use, but they are not optional if that is the functionality you want. A border router forwards Thread/IP traffic; it is not by itself a guarantee of an app/controller with the right features.

The manual also documents IKEA remote use without adding the bulb to IKEA Home smart. This particular pre-paired kit is manufacturer-supported; it is not evidence that any two arbitrary Matter devices can be directly paired without a controller. Nor is Thread a Zigbee network. Do not assume an old TRÅDFRI gateway or arbitrary old Zigbee remote can directly commission this new bulb because both bear the IKEA name.

Literal wiring and skills
The lamp uses its factory Australian mains flex and E27 holder; the remote is battery-powered wireless 2.4GHz. There is no new wall control cable and no need to pull Cat5e for the hubless kit. Optional hubs need their own documented power/network connections; none is included or costed as a mandatory part of this minimum.

Required practical items and safety
Reuse an existing Australian 230V socket and a stable table/edge suitable for TERTIAL's supplied clamp. TERTIAL is a complete lamp, not just a loose E27 holder, and is rated for a maximum 13W light source. The selected bulb fits that limit. Turn power off when fitting a bulb; keep the lamp's ordinary inline switch on during normal remote operation. Do not put these smart bulbs behind an ordinary phase-cut wall dimmer. Plug-in assembly does not require mains rewiring; any new fixed socket or alteration does require a licensed electrician. Keep coin/button batteries away from children.

Complexity, availability and adding another light
This is low complexity for the documented pre-paired physical-control use: safe plug-in assembly and battery fitting, not electrical wiring or programming. App/Matter expansion is a separate commissioning task with ecosystem and Thread-network requirements. Keep the printed Matter setup information private and retain it for future changes.

The IKEA pages showed promotional prices, but actual delivery/store stock requires a postcode/store choice and was not confirmed here. This is a dated budget, not a claim all parts are available in every store. Another identical full kit costs AUD22.49 (about USD15.52), plus a suitable fixture if needed. The same kit plus this lamp is AUD45.88 (about USD31.66); that includes another remote, so do not describe the whole amount as a bulb-only marginal cost. Charger and remaining spare cells are reusable infrastructure.

Price basis
Prices checked 8 November 2026 (Australia/Sydney). These are Australian listings, not US kits. USD figures are converted equivalents using RBA 6 November 2026: AUD1 = USD0.6900, rounded to cents; converted totals use the unrounded AUD sum. GST is confirmed only where stated above; the other extracted listings did not establish tax inclusion. Stock and offers can change. Subtotals exclude shipping, cables/building wiring, duties if importing, labour and the separately identified site items. No purchases or hardware testing are claimed.

Manufacturer / implementation references
Post Reply

Return to “Ikea TRÅDFRI Discussion”