Lightify hardware recovery budget: keep a suitable Zigbee bulb and add a physical button

Discuss the Osram / Sylvania Lightify and Lightify Pro Hubs
Post Reply
User avatar
ZerOne
Site Admin
Posts: 292
Joined: Sun Dec 13, 2020 8:21 am

This is a practical reuse budget for an existing, suitable Lightify bulb, not a recommendation to buy a new obsolete gateway. It complements the hub-choice discussion with the physical button, actual lamp fixture and controller costs that are often left out.

Start with the right existing lamp
OSRAM's official notice says the Lightify cloud service ended on 31 August 2021. A gateway found cheaply on eBay is not proof of a working current cloud/app service. Some existing Zigbee lights can instead move to a supported local coordinator; this is not a universal promise about every OSRAM/Sylvania product or region.

One documented Zigbee2MQTT example is OSRAM AC03641, LIGHTIFY LED Classic A60 clear, exposing on/off and brightness. This example requires that you already own a matching E27 bulb labelled for Australian mains use, with input suitable for 230V and power no more than the fixture's 13W limit. Check the physical label and local approval; the community device page is not a regional electrical compliance certificate. A US 120V version, a different fitting or an unidentified Wi-Fi/Bluetooth lamp is outside this bill of materials.

Required new equipment for that reuse case Priced equipment subtotal: AUD459.39 (about USD316.98).

The existing verified bulb contributes AUD0 / USD0 additional spend, not a claim that a newly purchased smart bulb is free. If you do not own one satisfying those checks, this is not an all-new purchasable one-light total; use a currently supported new-light system instead. No invented used-bulb or discontinued-hub price has been inserted.

Home Assistant Green has no Zigbee or Z-Wave radio built in. This budget deliberately adds the radio and an Australian supply: the international Green box has EU/US/UK plug adapters, not an AU plug. Its included Ethernet lead connects to an existing router/free LAN port. An existing phone/computer and internet for initial downloads are reused, at AUD0 / USD0 additional purchase cost here; those are assumptions, not free equipment for a new house. Green needs 12V DC, 1A, centre positive, 5.5 × 2.1mm, not USB power or PoE.

The important missing link: button logic
The SNZB-01P has an included CR2477 cell and reports single/double/long actions. Zigbee2MQTT explicitly says this model cannot directly bind to devices/groups. The working path is button → Zigbee coordinator → Zigbee2MQTT/Mosquitto → Home Assistant automation → coordinator → Lightify bulb. Green, the radio, broker and software must remain running. Do not buy this button expecting a direct paired remote that keeps working when the controller is unplugged.

Run free Home Assistant OS, Mosquitto and Zigbee2MQTT using the MG24's documented coordinator/Ember configuration. Pair the known bulb using its own supported reset/pairing instructions, then the button. Create and test explicit local automations such as single press on, double press off and long press a chosen brightness. The AC03641 page supports brightness, not a promise of tunable-white/RGB control or continuous dimming from a hold event. No paid commissioning licence or surviving Lightify cloud account is required for this path.

Literal wiring and physical setup
The bulb and button communicate over 2.4GHz Zigbee, not Wi-Fi. The button is wireless/battery-powered; TERTIAL supplies the light through its normal Australian mains flex, plug and E27 holder. Green uses its included Ethernet patch lead to the existing router and USB to the coordinator; the MG24 includes an extension for radio positioning. No new wall-switch cable is needed.

Reuse a protected Australian socket and a stable surface/clamp location. Turn the lamp off for bulb changes, leave its inline switch on during normal remote use and do not use an ordinary phase-cut dimmer. No opening, reflashing or live electrical modification is proposed. New fixed wiring is licensed-electrician work; button cells need child-safe handling.

Complexity and whether recovery is worth it
This is an intermediate software project, not a consumer hub's one-screen wizard. It is technically complete for the specified existing-bulb scenario, but expensive if you buy a whole host for one old bulb. The host, supply and radio basket is AUD417.00 (about USD287.73), reusable across supported devices. If that infrastructure is already installed, the new button plus complete lamp is AUD42.39 (about USD29.25); if your existing bulb is already in a suitable fixture, even that fixture need not be repurchased. Additional recovered bulbs still require individual compatibility and regional checks, not a fictional “per Lightify light” retail price.

Price basis
Prices checked 8 November 2026 (Australia/Sydney). These are Australian listings, not US kits. USD figures are converted equivalents using RBA 6 November 2026: AUD1 = USD0.6900, rounded to cents; converted totals use the unrounded AUD sum. GST is confirmed only where stated above; the other extracted listings did not establish tax inclusion. Stock and offers can change. Subtotals exclude shipping, cables/building wiring, duties if importing, labour and the separately identified site items. No purchases or hardware testing are claimed.

Manufacturer / implementation references
Post Reply

Return to “Osram / Sylvania Lightify Discussion”